Klára Šafářová

Email: klara.safarova@upol.cz
Location: Slechtitelu 11, 783 71 Olomouc
Phone: (+420) 58 563 1429
Fax: (+420) 58 563 4958

 

Professional:
Born: July 28. 1982,ˇÚsti nad Orlicí , Czech Republic
2000-2005 - Mgr.  Palacký University in Olomouc, Faculty of Science, specialisation: Mathematic  and Physics
2005-2010  – Ph.D. Postgraduate study – Department of Experimental Physics, PalackyUniversity in Olomouc, Ph.D.  
2006-2011 - researcher at Centre for Nanomaterial Research, Palacký University Olomouc
since 2011 -  Junior researcher at Regional Centre of Advanced Technologies and Materials,  PalackýUniversityOlomouc

Research Activites:
Electron microscopy TEM, SEM, Magnetic force microscopy, Plasma, microscopy (AFM, MFM, STM)

Publication activities:

  • Author or co-author of  10 papers
  • Co-autor of the book: Fine problems of present physics, Olomouc, 2007.   ISBN 978 80-244-1690-8

 Projects:
A leader and/or co-investigator of 2 national projects:

  • Metrology of nanocomposite materials by Transmission Electron Microscopy , FRVŠ project of MŠMT, no.667, 2007  (autor of this project)
  • Computer analysis of air circulation, FRVŠ project of MŠMT, no. 2216, 2008
     (co-investogator)
    Membership in scientific societies:
    A member of Czechoslovak Microscopy Society (since 2006)List of selected publications:

1.  Bourlinos, A.B., Safarova, K., Siskova, K., Zboril, R.: The production of chemically converted graphenes from graphite fluoride, Carbon, Volume 50, Issue 3, 2012, Pages 1425-1428.
2.  Zbořil, R., Karlický, F., Bourlinos, A.B., Steriotis, T.A., Stubos, A.K., Georgakilas V., Šafářová, K., Jančík, D., Traoalis, CH., Otyepka, M.:  Graphene  Fluoride: A Stable Stoichiometric Graphene Derivative and its  Chemical  Conversion to Graphene, Small, Volume 6, Issue 24, 2010, Pages 2885-2891.
3. Šišková, K., Šafářová, K., Seo, J.-H., Mashlan, M., Zbořil, R.: Non-chemical approach toward 2D self-assemblies of Ag nanoparticles via cold plasma treatment of substrates, Nanotechnology, Volume 22, 2011, 275601.
4. Kukutschová, J., Moravec, P., Tomášek, V., Matějka, V., Smolík, J., Schwarz, J., Seidlerová, J., Šafářová, K., Filip, P.: On airborne nano/micro-sized wear particles  released from low-metallic automotive brakes,  Environmental Pollution, Volume   159,  Issue 4, 2011, Pages 998-1006.
5. Safarova, K., Dvorak, A., Kubinek, R., Vujtek, M., Rek, A.: Usage of AFM, SEM and TEM for the research of carbon nanotubes. Modern Research and Educational Topics in Microscopy, FORMATEX Microscopy Books, A. Mendéz-Vilas and J. Díaz (eds.). Vol. 2, 2007. 513-519. ISBN-13 : 978-84-611-9420-9
6. Safarova, K., Mašláň, M., Kubínek, R., Pechoušek, J. :Use of Cold Plasma for transformation of iron nanoparticles, Chemical Papers 102, 2008. 1498-1501. ISSN 1803-2389.

 

 

 

Show publications

Publications

2011

  • [DOI] K. Siskova, K. Safarova, J. H. Seo, R. Zboril, and M. Mashlan, “Non-chemical approach toward 2D self-assemblies of Ag nanoparticles via
    cold plasma treatment of substrates,” NANOTECHNOLOGY, vol. 22, iss. 27, 2011.
    [Bibtex]
    @article ISI:000291021200028,
    Author = Siskova, Karolina and Safarova, Klara and Seo, Jung Hwa and Zboril,
       Radek and Mashlan, Miroslav,
    Title = Non-chemical approach toward 2D self-assemblies of Ag nanoparticles via
       cold plasma treatment of substrates,
    Journal = NANOTECHNOLOGY,
    Year = 2011,
    Volume = 22,
    Number = 27,
    Month = JUL 8,
    Abstract = The nano-modification of selected substrates by means of atmospheric
       cold plasma treatment was exploited for the two-dimensional (2D)
       self-assembling of silver nanoparticles (Ag NPs). Such a useful
       combination of the cold plasma treatment of substrate surface and an
       immediate easy deposition of Ag NPs creating the 2D self-assemblies on
       the substrates is published for the first time, to the best of our
       knowledge. Except for the cold plasma treatment, mainly the following
       parameters influenced the resulting NP assemblies: the choice of solvent
       mixture, concentration of Ag NP dispersions, and the deposition
       technique. The 2D self-assemblies of Ag NPs, providing the same work
       function as a Ag electrode, were formed on the cold plasma-treated
       substrates when a drop-casting technique was employed. The possibility
       of an easy preparation of the Ag NP 2D self-assemblies on substrates
       without using any chemical agents and/or evaporating chamber could be
       exploited, e.g. in photovoltaic and light-emitting diode devices.,
    DOI = 10.1088/0957-4484/22/27/275601,
    Article-Number = 275601,
    ISSN = 0957-4484,
    Unique-ID = ISI:000291021200028,
    
  • [DOI] J. Kukutschova, P. Moravec, V. Tomasek, V. Matejka, J. Smolik, J. Schwarz, J. Seidlerova, K. Safarova, and P. Filip, “On airborne nano/micro-sized wear particles released from low-metallic
    automotive brakes,” ENVIRONMENTAL POLLUTION, vol. 159, iss. 4, pp. 998-1006, 2011.
    [Bibtex]
    @article ISI:000288357800023,
    Author = Kukutschova, Jana and Moravec, Pavel and Tomasek, Vladimir and Matejka,
       Vlastimil and Smolik, Jiri and Schwarz, Jaroslav and Seidlerova, Jana
       and Safarova, Klara and Filip, Peter,
    Title = On airborne nano/micro-sized wear particles released from low-metallic
       automotive brakes,
    Journal = ENVIRONMENTAL POLLUTION,
    Year = 2011,
    Volume = 159,
    Number = 4,
    Pages = 998-1006,
    Month = APR,
    Abstract = The paper addresses the wear particles released from commercially
       available ``low-metallic'' automotive brake pads subjected to brake
       dynamometer tests. Particle size distribution was measured in situ and
       the generated particles were collected. The collected fractions and the
       original bulk material were analyzed using several chemical and
       microscopic techniques. The experiments demonstrated that airborne wear
       particles with sizes between 10 nm and 20 mu m were released into the
       air. The numbers of nanoparticles (< 100 nm) were by three orders of
       magnitude larger when compared to the microparticles. A significant
       release of nanoparticles was measured when the average temperature of
       the rotor reached 300 degrees C, the combustion initiation temperature
       of organics present in brakes. In contrast to particle size distribution
       data, the microscopic analysis revealed the presence of nanoparticles,
       mostly in the form of agglomerates, in all captured fractions. The
       majority of elements present in the bulk material were also detected in
       the ultra-fine fraction of the wear particles. (C) 2010 Elsevier Ltd.
       All rights reserved.,
    DOI = 10.1016/j.envpol.2010.11.036,
    ISSN = 0269-7491,
    Unique-ID = ISI:000288357800023,
    

2010

  • [DOI] R. Zboril, F. Karlicky, A. B. Bourlinos, T. A. Steriotis, A. K. Stubos, V. Georgakilas, K. Safarova, D. Jancik, C. Trapalis, and M. Otyepka, "Graphene Fluoride: A Stable Stoichiometric Graphene Derivative and its
    Chemical Conversion to Graphene," SMALL, vol. 6, iss. 24, pp. 2885-2891, 2010.
    [Bibtex]
    @article ISI:000285793900015,
    Author = Zboril, Radek and Karlicky, Frantisek and Bourlinos, Athanasios B. and
       Steriotis, Theodore A. and Stubos, Athanasios K. and Georgakilas,
       Vasilios and Safarova, Klara and Jancik, Dalibor and Trapalis, Christos
       and Otyepka, Michal,
    Title = Graphene Fluoride: A Stable Stoichiometric Graphene Derivative and its
       Chemical Conversion to Graphene,
    Journal = SMALL,
    Year = 2010,
    Volume = 6,
    Number = 24,
    Pages = 2885-2891,
    Month = DEC 20,
    Abstract = Stoichoimetric graphene fluoride monolayers are obtained in a single
       step by the liquid-phase exfoliation of graphite fluoride with
       sulfolane. Comparative quantum-mechanical calculations reveal that
       graphene fluoride is the most thermodynamically stable of five studied
       hypothetical graphene derivatives; graphane, graphene fluoride, bromide,
       chloride, and iodide. The graphene fluoride is transformed into graphene
       via graphene iodide, a spontaneously decomposing intermediate. The
       calculated bandgaps of graphene halides vary from zero for graphene
       bromide to 3.1 eV for graphene fluoride. It is possible to design the
       electronic properties of such two-dimensional crystals.,
    DOI = 10.1002/smll.201001401,
    ISSN = 1613-6810,
    Unique-ID = ISI:000285793900015,
    
  • M. Miglierini and K. Safarova, "Magnetic Features at the Surfaces of Nanocrystalline Ribbons," ACTA PHYSICA POLONICA A, vol. 118, iss. 5, pp. 840-842, 2010.
    [Bibtex]
    @article ISI:000285797100053,
    Author = Miglierini, M. and Safarova, K.,
    Title = Magnetic Features at the Surfaces of Nanocrystalline Ribbons,
    Journal = ACTA PHYSICA POLONICA A,
    Year = 2010,
    Volume = 118,
    Number = 5,
    Pages = 840-842,
    Month = NOV,
    Note = 14th Czech and Slovak Conference on Magnetism, Kosice, SLOVAKIA, JUN
       06-09, 2010,
    Organization = Safarik Univ, Fac Sci; Inst Phys, Slovak Acad Sci; Slovak Phys Soc,
    Abstract = Magnetic behaviour of Nanoperm Fe(90)Zr(7)B(3) nanocrystalline alloy is
       studied by surface sensitive techniques comprising atomic force
       microscopy and magnetic force microscopy Correlation of structural
       arrangement and magnetic order including the orientation of net
       magnetization is obtained by the help of the Mossbauer spectrometry
       As-quenched amorphous alloys show no magnetic features After annealing,
       maze magnetic domains have developed Their shape is governed by surface
       crystallization Position of net magnetization out of the ribbon plane by
       about 26 degrees was determined by the Mossbauer spectrometry,
    ISSN = 0587-4246,
    Unique-ID = ISI:000285797100053,